In September 2025 we announced a research and development project with Ten47, the UK connector and custom cable assembly specialist. The goal was to build RFID tags into cable connectors at the point of manufacture, so rental companies get RFID cable tracking without fitting tags themselves.
That work is now complete. The first RFID-enabled cables will be available to order in early 2027, and getting there changed our view of where the hard part of the problem really was.
Why build the tag into the connector?
Most RFID cable tracking in AV and event hire uses tags fitted to the outside of a cable after purchase. That approach does work. One AV hire customer who retrofitted tags to their existing equipment, including cables, reached more than 90% accuracy in automated tracking on their first rollout and cut inventory management time by over 50%.
Retrofitting has its limits though. Every tag is an extra job for someone in the warehouse. Anything mounted on the outside of a cable also takes the same knocks, mud and pressure washing as the cable itself.
Sealing the tag inside the moulding removes the fitting step. It also protects the tag for the working life of the product, with nothing on the outside to snag or peel away.
The real problem was size
In our original article, we described metal interference as the barrier to tagging cables, which was true. But the R&D project showed us the harder problem was fitting a tag that reads well into a very small space.
We tested PCB and ceramic tags in a range of sizes and looked at where in the connector each one read best. The PCB tags gave a noticeably shorter read range than the ceramic options, so we ruled them out. Ceramic gave us the read performance we needed in a form factor small enough to fit inside the connector.
Surviving 185°C
The moulding process added a second constraint. Ten47’s moulding heats to 185°C, and the tag had to go through that process with the connector, then perform in its final position afterwards. Retrofitted tags never face this, so there was no existing answer to lean on.
The finished connector is built from two moulded thermoplastic layers, with the tag sealed inside. Samples were produced and tested in-house with our own readers, before they then went out to end users to test in their own facilities, using their own RFID readers and setups.
“The product uses two thermoplastic layers to withstand demanding applications. A thermoplastic resin pre-mould bonds the cable to the connector, providing strain relief and secure terminations. A final thermoplastic elastomer overmould absorbs impact and creates an insulated, secure grip for easier mating and safer handling. Hiding the RFID inside brings big advantages for the client, as it removes the need for an externally mounted tag.” – Steven Lynch, Commercial Manager, Ten47.
“We spent most of our time on one trade-off: getting the read range we wanted from a tag small enough to sit inside the connector. The ceramic tags gave us that, and they came through the moulding process still performing.” Richard Harrison, Technical Sales Director, CoreRFID.
How does embedded RFID cable tracking help rental companies?
The biggest gain is in booking kit back in after a job. Checking returned cables one by one against a job sheet can take hours. With tags built into the connectors, the same task takes seconds or minutes.
Stock records are updated as kit comes back through the door, without anyone keying in serial numbers or scanning barcodes one at a time.
Working with your existing systems
Customers can integrate RFID cable tracking into their hire rental software using RFID reader toolkits. CoreRFID is vendor-independent across hardware, so we can work with the readers you already have or help you choose new ones.
If you need more support, we can provide RFID consultancy or middleware for integration via our in-house software developers.
What’s available, and when?
The RFID-enabled range covers most of the EverGrip series of overmoulded products, made by Ten47’s long-standing partner company, Lex Products:
- EverGrip 19-pin Socapex cable extensions, including LSC19 moulded Socapex extensions and LSC19 moulded fan-in and fan-out extensions
- PowerFLEX CEE EverGrip extensions, including the PowerFLEX CEE Y-splitter
- powerCON TRUE1 cable extensions and adapters, including 16A powerCON TRUE1 TOP extensions, the TRUE1 TOP Y-splitter, the TRUE1 TOP tee piece assembly and the TRUE1 Trelco
Availability is expected from early 2027, with typical lead times of two to six weeks depending on order quantity. You can order RFID-enabled cables through CoreRFID or directly from Ten47.
We’ll have samples on the CoreRFID stand at the Showman’s Show on 21st & 22nd October 2026, stand 36 and at Plasa Focus Leeds on 11th & 12th May 2027, stand 9.
If you can’t make either show, or you’d like to talk through how they’d fit into your equipment hire operation, get in touch.

RFID-enabled cables: common questions
What is an RFID-enabled cable?
An RFID-enabled cable has an RFID tag sealed inside its moulded connector during manufacture. A reader can identify it without line of sight, so a whole case of cables can be read without unpacking it.
Can I retrofit tags to my existing cables instead?
Yes. CoreRFID have supported many businesses in the AV, Events & Entertainment industry to retrofit RFID tags to their existing inventory. Embedded tags remove the fitting step and are protected against wear and tear inside the moulding.
How do the tags survive the moulding process?
The moulding process heats to 185°C. During research and development, we tested several tag types and chose ceramic RFID tags because they gave a longer read range in a small form factor and still performed after moulding.
Do I need new software to use RFID-enabled cables?
Not necessarily. Customers can integrate the tags into their existing hire rental software using RFID reader toolkits. It depends on which software you use. HireHop and Rentman both offer RFID integration natively, whereas Current RMS is expected to release this feature late 2026. Always check with your provider before purchasing any hardware. Our in-house development team can build middleware to connect your RFID system to your existing hire software if you have a custom-built setup or your current provider doesn’t offer it.
Which cables are available with embedded RFID?
Most of the EverGRIP overmoulded range, covering 19-pin Socapex extensions, PowerFLEX CEE extensions and powerCON TRUE1 extensions and adapters.
When can I order, and who from?
Availability is expected from early 2027, with typical lead times of two to six weeks depending on quantity. Orders go through CoreRFID or directly to Ten47.